Manual Transfer switch from shoreline power and RV on-board generator
Manual Transfer switch for universal application
Industrial grade cam switch that can withstand vehicle vibration
BREAK BEFORE MAKE design guarantees only one source will be used at a time
No fancy electronic modules so less breakdown and malfunction
Heavy duty 1.5 mm steel WEATHER TIGHT enclosure
Removeable bottom plate for easy wiring
Polyurethane gasket on door for proper sealing
Epoxy textured powder coating inside out with 4 mounting holes
Lots of room for wiring harness
Horizontal or vertical mounting
Quick and easy installation
The MTSRV63 is intended for use as a safe way of transferring from generator or shoreline power source for your mobile home. It can also be used to power two loads from one source. This switch transfers two hot line and neutral (2L+N) from one source to your load. Only qualified electrician familiar with transfer switch should install this panel. Check your code when switching/bonding neutrals. Know what you are buying and its application. We do not encourage DIY'ers to install this switch.